Here is a repair I did about a year ago. I replaced the bridge foot on this Stiver mandolin with one I fabricated from an ebony blank. The need for this repair was due to a typical northern Arizona instrument problem. The mandolin had dried out and "acclimated" to our dry environment, which altered the geometry of the instrument. The neck angle was so high that the original bridge could not be raised tall enough to yield appropriate playing action... strings were too low to the fingerboard and it was buzzing like crazy. While I was at it, I leveled frets and setup the mandolin as perfectly as possibly with a new bone nut.
After making the new bridge foot, it was important to sand the bottom of it to precisely match the contour of the mandolin top.
This enables the best transfer of sound vibration from the strings, through the bridge, and into the body of the instrument. Anything other than an absolute perfect fit is unacceptable in this case.
Here you can see the old bridge foot,
the new one made from scratch,
and both side-by-side.
The new bridge foot is almost 1/4" taller than the old one. I made it just tall enough for the strings to setup at the proper height once the bridge saddle was put into place on the posts. I didn't want to make the new piece any larger than necessary. By making it as close to the original size as possible the original sound of the instrument would be preserved as much as possible.
I didn't take any final pictures of the completed project. But this repair was a complete success and the customer was extremely pleased with the renewed playability of the instrument.
(Post Script) It should be noted that trying to purposely acclimate a fine instrument (such as this one) to the dry humidity of Flagstaff is usually unrecommended, if not highly discouraged. It is much easier on the instrument, and on you as the owner to simply invest in and learn how to use the appropriate humidifier, and more importantly get in the habit of keeping the instrument properly hydrated. The owner of this instrument was lucky we didn't have cracks to fix or any major structural repair, worse than what we saw, anyway.
-R.E.
Monday, June 2, 2008
Mando Acclimation
Labels:
bridge,
geometry,
humidity,
mandolin,
neck angle,
Repair Report
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment